Minhyeok Lee, Ph.D.

Biography

Jul. 2023	Lecturer, Department of Mechanical Engineering, The University of Tokyo
Apr. 2019	Assistant Professor, Department of Mechanical Engineering, The University of Tokyo
Jul. 2018	Postdoctoral Researcher, Department of Mechanical Engineering, The University of Tokyo
Jun. 2018	Ph.D., Department of Mechanical Engineering, The University of Tokyo
Apr. 2018	Project Academic Support Specialist, Department of Mechanical Engineering, The University of Tokyo
May 2016	Visiting Student Research Collaborator, Ju's Combustion Lab., MAE, Princeton University
Mar. 2015	M.Eng., Department of Mechanical Engineering, The University of Tokyo
Mar. 2011	B.Eng., Department of Mechanical Engineering, The University of Tokyo

Fellowship

Nov. 2013 - Mar. 2018	Global Leader Program for Social Design and Management (GSDM), The University of Tokyo
Mar. 2006 - Mar. 2011	Japan-Korea Joint Government Scholarship Program for Students in Department of Science and Engineering

Research Interests

• Elucidation of combustion phenomena: hydrogen/ammonia combustion, cool flame, flame-wall interaction, and catalytic combustion
• Creation of novel carbon-neutral energy conversion technologies
• Development of high-performance thermoelectric power generation system
• Development of MEMS wireless temperature sensor, etc.

Membership of Societies

• Combustion Institute
  
• Combustion Society of Japan
  
• The Heat Transfer Society of Japan
  
• The Japan Society of Mechanical Engineers
  

Award

• Young Researcher Encouragement Award, Combustion Society of Japan, 2024.
  
• First Prize for Best Paper Award (Co-author), Asian Conference on Thermal Sciences (ACTS 2024), 2024.
  
• Scientific Contribution Award, The Heat Transfer Society of Japan, 2024.
  
• Best Paper Award, Combustion Society of Japan, 2023.
  
• JSME Young Engineers Award, JSME, 2022.
  
• Merit for Thermal Engineering Best Paper, Thermal Engineering Division, JSME, 2020.
  

Publication

Journal Paper

• W. Kim*, Y. Ueno, R. Saeki, T. Johzaki, T. Endo, M. Lee, K. Choi, and K. Kuwana,
  “Effect of Oxygen Concentration on the Minimum Explosible Concentration of Aluminum Powders,”
  Powder Technology, vol. 455, 120794, 2025.

• J. A. Shamim*, Y. Takahashi, M. Lee, J. Choi, W. -L. Hsu, K. Nawaz, N. Miljkovic, and H. Daiguji*,
  “Coalescence-induced spontaneous shedding of microdroplets on superhydrophobic surfaces featuring enclosed micropillars with hierarchical roughness,”
  ACS Applied Materials & Interfaces, vol. 17, no. 8, pp. 12782-12796, 2025.

• M. Zhou, M. Lee*, Y. Ju, and Y. Suzuki,
  “Spatial Distribution and Temporal Evolution of Wall-Stabilized DME/O₂ Premixed Cool Flames,”
  Combustion and Flame, vol. 271, 113814, 2025.

• V. E. C. Baptistella*, Z. Guo, M. Lee, G. Ribatski, and Y. Suzuki,
  “Development of a Sensor for Liquid Film Thickness Measurements during Annular Flow in Microchannel,”
  Experiments in Fluids, vol. 65, 161, 2024.

• D. Wang, Y. Xing, M. Lee, and Y. Suzuki*,
  “Effects of Wall Temperature and Water Vapor on the Nitriding of Stainless Steel Induced by Ammonia Flames,”
  Proceedings of the Combustion Institute, vol. 40, no.1-4, 105562, 2024.

• K. Otsuka*, T. Sugihara, T. Inoue, W. Jia, S. Matsushita, T. Saito, M. Lee, T. Taniguchi, K. Watanabe, G. Pitner, M.-Y. Li, T.-A. Chao, R. Xiang, S. Chiashi, and S. Maruyama*,
  “Coaxial Boron Nitride Nanotubes as Interfacial Dielectric Layers to Lower Interface Trap Density in Carbon Nanotube Transistors,”
  Nano Research, vol. 16, no. 11, pp. 12840-12848, 2023.

• M. Lee, G. Yoo, J. Peng, S. Uchida, A. Yamamoto, and Y. Suzuki*,
  “Convection-effect-enhanced Micro Thermoelectric Module Directly Heated by Catalytic Combustion,”
  Applied Thermal Engineering, vol. 232, 121038, 2023.

• T. Mizuno, Y. Suzuki, and M. Lee*,
  “Ignition and Extinction Characteristics of n-alkane Cool Flames on a Heated Wall with Different Surface Reactivity,”
  Fuel, vol. 348, 128587, 2023.

• G. Li, Y. Suzuki, and M. Lee*,
  “Investigation of Premixed Cool Flame Ignition Characteristics under Mildly-Elevated Pressures by Using TDLAS,”
  Journal of the Combustion Society of Japan, vol. 65, no. 213, pp. 178-184, 2023.

• P. Feng, M. Lee, D. Wang, and Y. Suzuki*,
  “Ammonia Thermal Decomposition on Quartz and Stainless Steel Walls,”
  International Journal of Hydrogen Energy, vol. 48, no. 75, pp. 29209-29219, 2023.

• D. Wang, M. Lee, and Y. Suzuki*,
  “Nitriding Effects of Ammonia Flames on Iron-based Metal Walls,”
  The Journal of Ammonia Energy, vol. 1., no. 1, pp. 1-10, 2023.

• S. Matsushita, K, Otsuka*, T. Sugihara, G. Zhu, K. Kittipaisalsilpa, M. Lee, R. Xiang, S.Chiashi, and S. Maruyama*,
  “Growing Horizontal Arrays of One-dimensional van der Waals Heterostructures as Transistor Channels,”
  ACS Applied Materials & Interfaces, vol. 15, no. 8, pp. 10965–10973, 2023.

• Y. Fan*, Z. Wang, Y. Wang, M. Lee, W.D. Kulatilaka, and Y. Suzuki,
  “Species Structures in Preheated Ammonia Micro Flames,”
  Proceedings of the Combustion Institute, vol. 39, no. 4, pp. 4427-4436, 2023.

• M. Lee*, R. Saeki, and W. Kim,
  “Numerical Study of Hydrogen Addition Effects on Aluminum Particle Combustion,”
  Journal of the Energy Institute, vol. 105, pp.72-80, 2022.

• S. Uchida, M. Lee, C.-H. Lee, and Y. Suzuki*,
  “High-temperature Monolithic SiGe Thermoelectric Device Directly-Heated by Catalytic Combustion,”
  Applied Physics Letters, vol. 120, no. 5, 053901, 2022. (Featured Article)

• M. Lee, Y. Fan, Y. Ju, and Y. Suzuki*,
  “Ignition Characteristics of Premixed Cool Flames on a Heated Wall,”
  Combustion and Flame, vol. 231, 111476, 2021.

• W. Kim*, R. Saeki, R. Dobashi, T. Endo, K. Kuwana, T. Mogi, M. Lee, M. Mikami, Y. Nakamura,
  “Research on Risk of Dust Explosions in Microgravity for Lunar and Planetary Exploration,”
  International Journal of Microgravity Science and Application, vol. 38, no. 2, 380204, 2021.

• Y. Fan, J. Guo, M. Lee, N. Iki, and Y. Suzuki*,
  “Quantitative Evaluation of Wall Chemical Effect in Hydrogen Flame Using Two-Photon Absorption LIF,”
  Proceedings of the Combustion Institute, vol. 38, no.2, pp. 2361-2370, 2021.

• M. Lee, T. Kwan, S. Hara, K. Morimoto, and Y. Suzuki*,
  “Development of Flexible Wireless Wall Temperature Sensor for Combustion Studies,”
  IEEE Sensors Letters, vol. 3, no. 11, 2501704, 2019.

• M. Lee, Y. Fan, C. B. Reuter, Y. Ju, and Y. Suzuki*,
  “DME/Oxygen Wall-Stabilized Premixed Cool Flame,”
  Proceedings of the Combustion Institute, vol. 37, no. 2, pp. 1749-1756, 2019.

• C. B. Reuter*, M. Lee, S. H. Won, and Y. Ju,
  “Study of the Low-Temperature Reactivity of Large n-Alkanes through Cool Diffusion Flame Extinction,”
  Combustion and Flame, vol. 179, pp. 23-32, 2017.

• M. Lee*, K. Morimoto, and Y. Suzuki,
  “Development of MEMS Wireless Wall Temperature Sensor for Combustion Studies,”
  Measurement Science and Technology, vol. 28, no. 3, 035101, 2017.

Review Article, Book Chapter

• M. Lee and Y. Suzuki,
  “Wall Chemical Effects on the Ignition and Distribution of Premixed Cool Flames,”
  Journal of the Combustion Society of Japan, vol. 63, no. 204, pp. 93-100, 2021. (in Japanese)

• Y. Suzuki, M. Lee, H. Asama, K. Nagatani, S. Hamasaki, S. Chikushi, C. H. Lee, Y. Fan, K. Nagase, H. Hachiuma, S. Fujimoto, N. Yokoo, H. Sato, K. Odagawa,
  “Development of Combustor/Heat Exchanger-Integrated Thermoelectric Power Generation System for Autonomous Robots,”
  Journal of the Robotics Society of Japan, vol. 39, no. 2, pp. 120-124, 2021. (in Japanese)

• Y. Fan, Y. Saiki, S. Wan, M. Lee, and Y. Suzuki,
  “Fundamentals of Combustion Diagnostics Using Laser Induced Fluorescence (LIF),”
  Journal of the Combustion Society of Japan, vol. 62, no. 200, pp. 132-142, 2020. (in Japanese)

• M. Lee, T. Kwan, K. Morimoto, and Y. Suzuki,
  “Development of the MEMS Wireless Temperature Sensor for Engine Cylinder Wall Temperature Measurements,”
  JSAE Engine Review, vol. 8, no. 8, pp. 16-20, 2018. (in Japanese)

International Conference

< 2025 >

• Z. Guo, M. Lee,and Y. Suzuki,
  “Study on the morphological characteristics of flashing spray from a single-hole nozzle,”
  11th International Symposium on Turbulence, Heat and Mass Transfer (THMT' 2025), Tokyo, Japan, Jul. 21-25, (2025). (submitted)

• Y. Xing, M. Lee,and Y. Suzuki,
  “Effect of Water Vapor on Nitriding of Stainless Steel Walls Induced by Ammonia Flames,”
  15th Asia-Pacific Conference on Combustion (ASPACC 2025), Singapore, May 18-22, (2025). (to be presented)

• X. Xu, M. Lee, T. Akiba, and Y. Suzuki,
  “Quantitative measurements of hydrogen atom concentrations in ammonia diffusion flames using two-photon absorption laser-induced fluorescence,”
  15th Asia-Pacific Conference on Combustion (ASPACC 2025), Singapore, May 18-22, (2025). (to be presented)

• T. Akiba, Y. Morii, M. Lee, K. Maruta, and Y. Suzuki,
  “Efficient evaluation of Arrhenius rates for quantum computing applications in reactive flow problems using Carleman linearization,”
  15th Asia-Pacific Conference on Combustion (ASPACC 2025), Singapore, May 18-22, (2025). (to be presented)

• H. Jiang, M. Lee, E. Cipriano, R. Caraccio, A. Cuoci, and Y. Suzuki,
  “Numerical Investigation of Surface Reaction Influences on Aluminum Particle Combustion Under Various Oxidizing Conditions,”
  The 62nd HTSJ International Heat Transfer Symposium, Okinawa, Japan, May 14-17, (2025). (to be presented)

• H. Park, T. Akiba, M. Lee, and Y. Suzuki,
  “OH tunable diode laser absorption spectroscopy for temperature measurements in hydrogen flames,”
  The 62nd HTSJ International Heat Transfer Symposium, Okinawa, Japan, May 14-17, (2025). (to be presented)

• M. Zhou, Y. Suzuki, and M. Lee
  “TOF-MS measurements of intermediate species during the ignition process of DME premixed cool flames,”
  The 62nd HTSJ International Heat Transfer Symposium, Okinawa, Japan, May 14-17, (2025). (to be presented)

• P. Feng, M. Lee, and Y. Suzuki,
  “Prediction of Nitrogen Diffusion into Iron-Based Materials under High Temperature,”
  The 62nd HTSJ International Heat Transfer Symposium, Okinawa, Japan, May 14-17, (2025). (to be presented)

• H. Jiang, M. Lee, E. Cipriano, R. Caraccio, A. Cuoci, and Y. Suzuki,
  “Numerical Investigation of Surface Reactions in Aluminum Particle Combustion Under Various Oxidizing Conditions,”
  Renewable Metal Fuels (ReMeF) Symposium, Rapperswil, Switzerland, Feb. 12-13, (2025), Poster #9.

< 2024 >

• H. Park, M. Lee, and Y. Suzuki,
  “Measurement of Hydrogen Flame Temperature by Using Two-Line OH Tunable Diode Laser Absorption Spectroscopy,”
  The 3rd Pacific Rim Thermal Engineering Conference 2024 (PRTEC2024), Hawaii, USA, Dec. 15-19, (2024), PRTEC-24177.

• T. Akiba, Y. Morii, M. Lee, K. Maruta, and Y. Suzuki,
  “Numerical method for combustion analysis of Arrhenius-type nonlinear system toward quantum computing with Carleman linearization,”
  The 3rd Pacific Rim Thermal Engineering Conference 2024 (PRTEC2024), Hawaii, USA, Dec. 15-19, (2024), PRTEC-24215.

• M. Zhou, M. Lee, Y. Ju, and Y. Suzuki,
  “Time-resolved species measurement during the ignition process of DME premixed cool flames,”
  21st International Conference on Flow Dynamics (ICFD 2024), Sendai, Japan, Nov. 18-20, (2024), OS2-2.

• Y. Xing, D. Wang, M. Lee, and Y. Suzuki,
  “Effect of Water Vapor on Metal Wall Nitriding Induced by Ammonia Flame,”
  3rd Symposium on Ammonia Energy, Shanghai, China, Sep. 22-26, (2024).

• P. Feng, A. Lele, M. Lee, Y. Ju, and Y. Suzuki,
  “Simulation of Nitrogen Atom Diffusion Using Machine-Learning-Based Interatomic Potential for Nitriding Model of Iron,”
  7th Micro/Nanoscale Heat & Mass Transfer International Conference (MNHMT2024), Nottingham, UK, Aug. 5-7, (2024), MNHMT2024-140668.

• D. Wang, Y. Xing, M. Lee, and Y. Suzuki,
  “Effects of Wall Temperature and Water Vapor on the Nitriding of Stainless Steel Induced by Ammonia Flames,”
  CI’s 40th International Symposium - Emphasizing Energy Transition, Milan, Italy, Jul. 21-26, (2024), 4J03.

• X. Xu, T. Akiba, M. Lee, and Y. Suzuki,
  “Investigation of ammonia counterflow diffusion flames through direct measurements of species distribution,”
  CI’s 40th International Symposium - Emphasizing Energy Transition, Milan, Italy, Jul. 21-26, (2024), Work-in-Progress Poster, 2P095.

• Y. Zhang, D. Zafra-Moreno, M. Lee, and Y. Suzuki,
  “Measurement of particle temperature in counterflow diffusion flames using two-color pyrometry,”
  CI’s 40th International Symposium - Emphasizing Energy Transition, Milan, Italy, Jul. 21-26, (2024), Work-in-Progress Poster, 2P097.

• M. Zhou, Y. Suzuki, and M. Lee,
  “Temporal evolution of major species during the ignition of DME premixed cool flames,”
  CI’s 40th International Symposium - Emphasizing Energy Transition, Milan, Italy, Jul. 21-26, (2024), Work-in-Progress Poster, 1P096.

• H. Jiang, M. Lee, and Y. Suzuki,
  “Numerical Study of Aluminum Particle Combustion in Different Oxidizing Environments,”
  CI’s 40th International Symposium - Emphasizing Energy Transition, Milan, Italy, Jul. 21-26, (2024), Work-in-Progress Poster, 5P016.

• Z. Guo, V. E. C. Baptistella, M. Lee, G. Ribatski, and Y. Suzuki,
  “Restiance-based MEMS Sensor for Liquid Film Thickness Measurement in Microchannel,”
  3rd Asian Conference on Thermal Sciences (ACTS 2024), Shanghai, China, Jun. 23-27, (2024), O-0276. (First Prize for Best Paper Award)

• W. Kim, R. Saeki, R. Dobashi, T. Endo, K. Kuwana, T. Mogi, M. Lee, S. Yazaki, M. Mikami, Y. Nakamura, and T. Ishikawa,
  “Flame propagation of aluminum dust clouds under microgravity conditions,”
  15th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions (ISHPMIE 2024), Napoli, Italy, Jun. 10-14, (2024).

• X. Xu, M. Lee, and Y. Suzuki,
  “Investigation of temperature and species distributions in ammonia diffusion flames,”
  19th International Conference on Numerical Combustion (ICNC 2024), Kyoto, Japan, May 7-10, (2024), ICNC2024-1606.

< 2023 >

• M. Lee, M. Zhou, and Y. Suzuki,
  “Investigation of Ignition Characteristics of Premixed DME Cool Flames through Time-Resolved Species Measurement,”
  (Invited Talk) 4th International Discussion Meeting on Chemistry and Technology of Combustion Application, Beijing, China, Dec. 15-18, (2023).

• M. Zhou, Y. Suzuki, and M. Lee,
  “TOF-MS Measurement of Intermediate Species in Wall-stabilized Premixed Cool Flames,”
  20th International Conference on Flow Dynamics (ICFD 2023), Sendai, Japan, Nov. 6-8, (2023), OS2-35.

• M. Lee and Y. Suzuki,
  “Investigation of Nitriding Effect of NH3 Flame on Metal Wall Surface Toward Decarbonization in Industrial Combustion Process,”
  (Invited Talk) 13th Saudi Arabian Section of the Combustion Institute (SAS-CI) meeting, Thuwal, Saudi Arabia, Oct. 25-26, (2023).

• Y. Ueno, R. Saeki, T. Johzaki, T. Endo, M. Lee, and W. Kim,
  “Effect of Oxygen Concentration on the Minimum Explosible Concentration of Aluminum Powders,”
  Asia Pacific Symposium on Safety 2023 (APSS 2023), Bangkok, Thailand, Oct. 17-20, (2023), EF_070.

• K. Adachi, Y. Ueno, R. Saeki, T. Johzaki, T. Endo, M. Lee, and W. Kim,
  “Minimum Explosible Concentration of Aluminum-Oxygen-Carbon Dioxide Mixtures ,”
  Asia Pacific Symposium on Safety 2023 (APSS 2023), Bangkok, Thailand, Oct. 17-20, (2023). EF_093

• R. Saeki, Y. Ueno, K. Adachi, R. Dobashi, T. Endo, K. Kuwana, T. Mogi, M. Lee, S. Yazaki, M. Mikami, Y. Nakamura, and W. Kim,
  “Microgravity Experiments of Flame Propagation in Aluminum Dust Clouds,”
  Asia Pacific Symposium on Safety 2023 (APSS 2023), Bangkok, Thailand, Oct. 17-20, (2023), EF_064.

• M. Lee, G. Li, T. Mizuno, and Y. Suzuki,
  “Effects of Surface Reactivity and Pressure on Cool Flame Ignition Characteristics,”
  17th International Heat Transfer Conference (IHTC-17), Cape Town, South Africa, Aug. 14-18, (2023), ID526.

• M. Lee, S. Uchida, J. Peng, G. Yoo, and Y. Suzuki,
  “Convection-Effect-Enhanced Thermoelectric Power Generation Directly-Heated by Catalytic Combustion,”
  17th International Heat Transfer Conference (IHTC-17), Cape Town, South Africa, Aug. 14-18, (2023), ID779.

• X. Xu, D. Wang, M. Lee, and Y. Suzuki,
  “Measurements of NH3 and NH2* profiles in ammonia counterflow diffusion flames,”
  2nd Symposium on Ammonia Energy, Orléans, France, Jul. 11-13, (2023), pp. 341-343.

• M. Lee, G. Li, and Y. Suzuki,
  “Investigation of Pressure Effects on Cool Flame Ignition Temperature through the Gas Temperature-compensated HCHO-TDLAS Measurement,”
  14th Asia-Pacific Conference on Combustion (ASPACC 2023), Kaohsiung, Taiwan, May 14-18, (2023), #142.

< 2022 >

• R. Saeki, Y. Ueno, R. Dobashi, T. Endo, K. Kuwana, T. Mogi, M. Lee, S. Yazaki, M. Mikami, Y. Nakamura, W. Kim,
  “Flame Propagation of Aluminum-air Mixtures in Microgravity Environment,”
  The 13th Asian Microgravity Symposium, Jeju, Korea, Oct. 24-28, (2022).

• Y. Ueno, R. Saeki, T. Johzaki, T. Endo, M. Lee, W. Kim,
  “Aluminum Dust Explosion in Oxygen-enriched Atmospheres,”
  The 13th Asian Microgravity Symposium, Jeju, Korea, Oct. 24-28, (2022).

• D. Wang, M. Lee, and Y. Suzuki,
  “Nitriding Effects of Ammonia Flames on Metal Walls Under Different Surface Temperatures,”
  1st Symposium on Ammonia Energy, Cardiff, UK, Sep. 1-2, (2022).

• Y. Fan, Z. Wang, Y. Wang, M. Lee, W.D. Kulatilaka, and Y. Suzuki,
  “Effect of Thermal Dissociation in Rich Preheated Ammonia Micro Flames,”
  39th International Symposium on Combustion (Combustion 2022), Vancouver, Canada, Jul. 24-29, (2022), 4D03.

• D. Wang, M. Lee, and Y. Suzuki,
  “Nitriding Effects of Ammonia Flames on Iron-based Metal Walls,”
  39th International Symposium on Combustion (Combustion 2022), Vancouver, Canada, Jul. 24-29, (2022), Work-in-Progress Poster, 1P114.

• G. Li, M. Lee, and Y. Suzuki,
  “Ignition Characteristics of Premixed Cool Flame at Elevated Pressures Investigated by TDLAS,”
  39th International Symposium on Combustion (Combustion 2022), Vancouver, Canada, Jul. 24-29, (2022), Work-in-Progress Poster, 2P014.

• Y. Suzuki, M. Lee, S. Uchida, H. Asama, K. Nagatani, S. Hamasaki, S. Chikushi, C. H. Lee, Y. Fan, K. Nagase, H. Hachiuma, S. Fujimoto, N. Yokoo, H. Sato, K. Odagawa,
  “Combustor/Heat Exchanger-Integrated Thermoelectric Power Generation System for Autonomous Robots ,”
  (Invited Talk) The Minerals, Metals & Materials Society Annual Meeting & Exhibition (TMS2022), Anaheim, USA, Feb. 27-Mar. 3, (2022).

< 2021 >

• T. Mizuno, M. Lee, and Y. Suzuki,
  “Ignition and Extinction Characteristics of Wall-stabilized Premixed n-Alkane Cool Flames,”
  13th Asia-Pacific Conference on Combustion (ASPACC 2021), Abu Dhabi, UAE, Dec. 5-9, (2021), W4-19.

• P. Feng, M. Lee, and Y. Suzuki,
  “Effect of Wall Surface Materials on Ammonia Pyrolysis,”
  13th Asia-Pacific Conference on Combustion (ASPACC 2021), Abu Dhabi, UAE, Dec. 5-9, (2021), M1-06.

• M. Lee, R. Saeki, Y. Suzuki, and W. Kim,
  “Numerical Study of Hydrogen Addition Effects on Aluminum Particle Combustion,”
  9th International Conference on Hydrogen Safety (ICHS 2021), Edinburgh, Scotland, Sep. 21-23, (2021), ID62.

• Y. Fan, Z. Wang, Y, Wang, M. Lee, W. Kulatilaka, and Y. Suzuki,
  “LIF Measurements of Species Structures in Ammonia Micro Flames,”
  12th US National Combustion Meeting, Texas, USA (Virtual), May. 24-26, (2021), 2G10.

• Y. Fan, J. Guo, M. Lee, N. Iki, and Y. Suzuki,
  “Evaluation of Wall Chemical Effect in Hydrogen Flame,”
  38th International Symposium on Combustion (Combustion 2020), Adelaide, Australia, Jan. 24-29, (2021), 1B08.

• M. Lee, T. Mizuno, and Y. Suzuki,
  “Wall Chemical Effects on Ignition Characteristics of Premixed DME/Oxygen Cool Flames,”
  38th International Symposium on Combustion (Combustion 2020), Adelaide, Australia, Jan. 24-29, (2021), Work-in-Progress Poster, LF-11.

• T. Mizuno, M. Lee, and Y. Suzuki,
  “Study on Ignition and Extinction Characteristics of n-alkane Wall-stabilized Cool Flames,”
  38th International Symposium on Combustion (Combustion 2020), Adelaide, Australia, Jan. 24-29, (2021), Work-in-Progress Poster, LF-14.

• S. Sakamoto, M. Lee, and Y. Suzuki,
  “Investigation of Pressure Effects on Wall-stabilized Cool Flames Using TDLAS,”
  38th International Symposium on Combustion (Combustion 2020), Adelaide, Australia, Jan. 24-29, (2021), Work-in-Progress Poster, LF-16.

• Z. Wang, M. Lee, Y. Fan, and Y. Suzuki,
  “Investigation of Pyrolysis Effects on Ammonia Micro Flames,”
  38th International Symposium on Combustion (Combustion 2020), Adelaide, Australia, Jan. 24-29, (2021), Work-in-Progress Poster, GPR-33.

• W. Kim, R. Saeki, T. Endo, K. Kuwana, T. Mogi, M. Lee, R. Dobashi, M. Mikami, T. Ishikawa, Y. Nakamura,
  “Understanding Flame Propagation Mechanism Through Suspended Aluminum Particle in Microgravity,”
  38th International Symposium on Combustion (Combustion 2020), Adelaide, Australia, Jan. 24-29, (2021), Work-in-Progress Poster, DES-13.

< 2020 >

• R. Saeki, R. Dobashi, T. Endo, K. Kuwana, T. Mogi, M. Lee, M. Mikami, T. Ishikawa, Y. Nakamura, W. Kim,
  “Flame Propagation Behavior of Aluminum Particle,”
  (Best Presentation Award) The 4th International Symposium on Fuels and Energy (ISFE2020), Hiroshima, Japan, Dec. 7-9, (2020), O05.

• M. Lee, T. Mizuno, and Y. Suzuki,
  “Investigation of the Wall Chemical Effect on Cool Flames,”
  (Invited Talk) 2020 Korean Institute of Chemical Engineers (KIChE) Fall Meeting International Symposium: e-conference, On-line, Oct. 14-16, (2020). (in Korean)

< 2019 >

• M. Lee, T. Mizuno, Y. Fan, Y. Ju, and Y. Suzuki,
  “Wall Chemical Effect on Cool Flame Ignition Behavior,”
  The 2nd Pacific Rim Thermal Engineering Conference (PRTEC 2019), Hawaii, USA, Dec. 13-17, (2019), PRTEC-24430.

• J. Peng, M. Lee, Y. Fan, A. Yamamoto, and Y. Suzuki,
  “Convection-effect-enhanced Thin Metal Thermoelectric Module Directly-Heated by Catalytic Combustion,”
  The 19th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2019), Krakow, Poland, Dec. 2-6, (2019), T1-B2.

• Y. Suzuki, Y. Fan, and M. Lee,
  “Quantitative Measurement of Near-wall Radicals Using Microscopic Two-photon-absorption Laser Induced Fluorescence (TALIF),”
  (Plenary Talk) 15th Asian Symposium on Visualization (ASV 15), Busan, Korea, Sep. 25-28, (2019), PL-2.

• M. Lee, Y. Fan, Y. Ju, and Y. Suzuki,
  “Study on Ignition Temperature of Wall-Stabilized Cool Flames,”
  12th Asia-Pacific Conference on Combustion (ASPACC 2019), Fukuoka, Japan, Jul. 1-5, (2019), ASPACC2019-1360.

• M. Lee, Y. Fan, and Y. Suzuki,
  “Evaluation of Cool Flame Ignition Temperature on Heated Walls,”
  11th US National Combustion Meeting, Pasadena, USA, Mar. 24-27, (2019), Work-in-Progress Poster, P33.

< 2018 >

• Y. Suzuki, M. Lee, S. Wan, and Y. Fan,
  “Wall Chemical Effect on Cool Flame,”
  (Invited Talk) 15th International Conference on Flow Dynamics (ICFD 2018) / 14th International Conference on Combustion and Energy Utilization (ICCEU 14), Sendai, Japan, Nov. 7-9, (2018), OS2-42.

• M. Lee, Y. Fan, Y. Ju, and Y. Suzuki,
  “Wall Chemical Effects on Wall-Stabilized Cool Flames,”
  37th International Symposium on Combustion (Combustion 2018), Dublin, Ireland, Jul. 29-Aug. 3, (2018), Work-in-Progress Poster, 1P087.

• M. Lee, Y. Fan, C. B. Reuter, Y. Ju, and Y. Suzuki,
  “Experimental Observation and Numerical Study of Wall-stabilized Premixed Cool Flames,”
  37th International Symposium on Combustion (Combustion 2018), Dublin, Ireland, Jul. 29-Aug. 3, (2018), 1D15.

< 2017 >

• M. Lee, Y. Fan, C. B. Reuter, Y. Ju, and Y. Suzuki,
  “Numerical Study and HCHO-PLIF Measurement of Wall-Stabilized Cool Flames,”
  11th Asia-Pacific Conference on Combustion (ASPACC 2017), Sydney, Australia, Dec. 10-14, (2017), P248.

• T. Kwan, M. Lee, K. Morimoto, and Y. Suzuki,
  “Cylinder Wall Temperature Measurement in the Optical Engine Using a Flexible Wireless Sensors,”
  The 9th International Conference on Modeling and Diagnostics for Advanced Engine Systems (COMODIA 2017), Okayama, Japan, Jul. 25-28, (2017), A203.

• C. B. Reuter, M. Lee, S. H. Won, and Y. Ju,
  “Study of the Low-Temperature Reactivity of Large n-Alkanes through Cool Diffusion Flame Extinction,”
  10th US National Combustion Meeting, Maryland, USA, Apr. 23-27, (2017), 2K04.

• M. Lee, C. B. Reuter, Y. Suzuki, and Y. Ju,
  “Numerical Study of Wall-Stabilized Cool Flames,”
  1st Asian Conference on Thermal Sciences (ACTS 2017), Jeju, Korea, Mar. 26-30, (2017), P00731.

• T. Kwan, M. Lee, K. Morimoto, and Y. Suzuki,
  "Wall Temperature Measurement in a Visualization Engine Using a Flexible Wireless Sensor,”
  1st Asian Conference on Thermal Sciences (ACTS 2017), Jeju, Korea, Mar. 26-30, (2017), P00670.

• C. B. Reuter, M. Lee, S. H. Won, and Y. Ju,
  “Effects of n-Alkane Chain Length on Cool Diffusion Flames,”
  55th AIAA Aerospace Sciences Meeting, Texas, USA, Jan. 9-13, (2017), AIAA-2017-1963.

< 2016 >

• C. B. Reuter, M. Lee, S. H. Won, and Y. Ju,
  “Effect of n-Alkane Chain Length on Cool Diffusion Flames,”
  32nd Annual Meeting of the American Society for Gravitational and Space Research (ASGSR 2016), Cleveland, USA, Oct. 26-29, (2016), #165.

< 2015 >

• M. Lee, K. Morimoto, and Y. Suzuki,
  “Flexible Wireless Wall Temperature Sensor for Unsteady Thermal Field,”
  The 15th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2015), Boston, USA, Dec. 1-4, (2015), W3B-02. (Journal of Physics: Conference Series, vol. 660, 012019.)

• M. Lee, K. Morimoto, and Y. Suzuki,
  “Evaluation of Non-Contact Wall Temperature Measurement Using MEMS Wireless Sensor,”
  JSAE/SAE International Powertrains, Fuels and Lubricants Meeting (PFL 2015), Kyoto, Japan, Sep, 1-4, (2015), SAE Paper 2015-01-1997 / JSAE Paper 20159222.

< 2014 >

• M. Lee, Y. Kawahara, K. Morimoto, and Y. Suzuki,
  “MEMS Wireless Temperature Sensor for Combustion Studies,”
  The 14th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2014), Awaji Island, Japan, Nov. 18-21, (2014), T1R.3. (Journal of Physics: Conference Series, vol. 557, 012077.)

• M. Lee and Y. Suzuki,
  “Non-Contact Wall Temperature Measurement Using MEMS Wireless Sensor,”
  The 35th International Symposium on Combustion (Combustion 2014), Work-in-Progress Poster, San Francisco, USA, Aug. 3-8, (2014), W4P036.

Domestic Conference

< 2024 >

• X. Xu, T. Akiba, M. Lee, and Y. Suzuki
  “Measurements of Radical Species and Temperature Distributions in Ammonia Counterflow Diffusion Flames,”
  62nd Symposium (Japanese) on Combustion, Osaka, Japan, Nov. 25-27, (2024), D223.

• H. Park, M. Lee, and Y. Suzuki,
  “Temperature Measurement of Hydrogen Flames Using Two-line OH Tunable Diode Laser Absorption Spectroscopy,”
  62nd Symposium (Japanese) on Combustion, Osaka, Japan, Nov. 25-27, (2024), A331.

• T. Akiba, Y. Morii, M. Lee, K. Maruta, and Y. Suzuki,
  “Numerical Method for Non-linear Systems of Reactive Flow with Carleman Linearization toward Quantum Computing,”
  62nd Symposium (Japanese) on Combustion, Osaka, Japan, Nov. 25-27, (2024), C334.

• Z. Guo, M. Lee, and Y. Suzuki,
  “Study on Morphological Characteristics of Flashing Spray from Single-Hole Nozzle,”
  JSME Thermal Engineering Conference 2024, Yamaguchi, Japan, May. 5-6, (2024), C52.

• G. Yoo, K. Wakamatsu, T. Akiba, M. Lee, and Y. Suzuki,
  “Study on Effects of Reformer on Off-gas Combustion Characteristics of Solid Oxide Fuel Cells,”
  JSME Thermal Engineering Conference 2024, Yamaguchi, Japan, May. 5-6, (2024), H44.

• P. Feng, A. D. Lele, Y. Ju, M. Lee, and Y. Suzuki,
  “Modeling of Nitrogen Atom Diffusion in Iron Nitriding Using AIMD,”
  JSME Thermal Engineering Conference 2024, Yamaguchi, Japan, May. 5-6, (2024), H44.

• M. Lee and Y. Suzuki,
  “Study on the effect of oxidizing atmospheres on ignition temperature of Aluminum,”
  61st National Heat Transfer Symposium of Japan, Kobe, Japan, May. 29-31, (2024), C223.

• M. Lee, P. Feng, Y. Xing, and Y. Suzuki,
  “Nitriding Effect Induced by Ammonia Flames on Iron-based Metal Surfaces,”
  67th KOSCO (The Korean Society of Combustion) Symposium, Yeosu, Korea, May 23-25, (2024).

• W. Jia, T. Sugihara, G. Zhu, Y. Feng, K. Otsuka, M. Lee, R. Xiang, S. Maruyama, S. Chiashi,
  “Fabrication of field-effect transistors with as-grown clean CNT channels on quartz substrates,”
  71st Japan Society of Applied Physics (JSAP) Spring Meeting, Tokyo, Mar. 22-25, (2024), 22p-P07-14.

< 2023 >

• M. Zhou, Y. Suzuki, and M. Lee,
  “Intermediates Species Measurement of the DME Low-Temperature Oxidation in Wall-Stabilized Cool Flames,”
  61st Symposium (Japanese) on Combustion, Akita, Japan, Nov. 15-17, (2023), D324.

• X. Xu, D. Wang, M. Lee, and Y. Suzuki,
  “Laser Diagnostics of Multi-Species Distributions in Ammonia Diffusion Flames,”
  61st Symposium (Japanese) on Combustion, Akita, Japan, Nov. 15-17, (2023), D323.

• D. Wang, Y. Xing, M. Lee, and Y. Suzuki,
  “Effects of Radicals on Metal Nitriding Induced by Ammonia Flames,”
  61st Symposium (Japanese) on Combustion, Akita, Japan, Nov. 15-17, (2023), A213.

• Y. Xing, D. Wang, M. Lee, and Y. Suzuki,
  “Effect of water vapor concentration on metal wall nitriding induced by ammonia flames,”
  JSME Thermal Engineering Conference 2023, Kobe, Japan, Oct. 14-15, (2023), E124.

• M. Lee, K. Uezono, and Y. Suzuki,
  “Study on combustion process of aluminum wires in different oxidizing atmospheres,”
  60th National Heat Transfer Symposium of Japan, Fukuoka, Japan, May 25-27, (2023), F131.

• D. Wang, M. Lee, and Y. Suzuki,
  “Effects of wall temperature on nitriding process of stainless steel induced by ammonia flames,”
  60th National Heat Transfer Symposium of Japan, Fukuoka, Japan, May 25-27, (2023), F122.

• X. Xu, D. Wang, M. Lee, and Y. Suzuki,
  “NH₃/NH₂/NH/NO distribution measurements in ammonia diffusion flames,”
  60th National Heat Transfer Symposium of Japan, Fukuoka, Japan, May 25-27, (2023), F134.

• V. E. C. Baptistella, Z. Guo, M. Lee, G. Ribatski, and Y. Suzuki,
  “Development of a MEMS sensor for liquid-film thickness measurements for annular flows in microchannel,”
  60th National Heat Transfer Symposium of Japan, Fukuoka, Japan, May 25-27, (2023), I224.

• T. Sugihara, K. Otsuka, W. Jia, S. Matsushita, T. Saito, K. Kittipaisalsilpa, M. Lee, S. Chiashi, and S. Maruyama,
  “Improved nanotube-metal contacts and switching behaviors in single SWCNT@BNNT transistors,”
  The 64th Fullerenes-Nanotubes-Graphene General Symposium, Nagoya, Mar. 1-3, (2023), 3P-19.

• W. Jia, T. Sugihara, G. Zhu, Y. Feng, K. Otsuka, M. Lee, R. Xiang, and S. Maruyama,
  “Carbon nanotube field-effect transistors with two-dimensional boron nitride as interface layers,”
  The 64th Fullerenes-Nanotubes-Graphene General Symposium, Nagoya, Mar. 1-3, (2023), 1P-3.

• W. Kim, R. Saeki, Y. Ueno, T. Endo, M. Lee, T. Mogi, R. Dobashi, K. Kuwana, S. Yazaki, M. Mikami, and T. Ishikawa,
  “Aluminum combustion experiment on board a parabolic flight aircraft,”
  The 37th Space Utilization Symposium, Online, Jan. 17-18, (2023), G-3.

< 2022 >

• D. Wang, M. Lee, and Y. Suzuki,
  “Effect of metal wall temperature on nitriding phenomena induced by ammonia flame,”
  The 60th Symposium (Japanese) on Combustion, Tokyo, Japan, Nov. 21-24, (2022), B214.

• G. Li, M. Lee, and Y. Suzuki,
  “Investigation of pressure effect on cool flame ignition characteristics with simultaneous measurements of HCHO concentration and gas temperature,”
  The 60th Symposium (Japanese) on Combustion, Tokyo, Japan, Nov. 21-24, (2022), A224.

• R. Saeki, Y. Ueno, R. Dobashi, T. Endo, K. Kuwana, T. Mogi, M. Lee, S. Yazaki, M. Mikami, Y. Nakamura, and W. Kim,
  “Aluminum particle behavior in a microgravity environment using parabolic flights,”
  The 60th Symposium (Japanese) on Combustion, Tokyo, Japan, Nov. 21-24, (2022), P306.

• P. Feng, M. Lee, and Y. Suzuki,
  “Mutual Interaction between Ammonia Thermal Decomposition and Nitriding on Metal Surface,”
  JSME Thermal Engineering Conference 2022, Tokyo, Japan, Oct. 8-9, (2022), H134.

• R. Saeki, Y. Ueno, R. Dobashi, T. Endo, K. Kuwana, T. Mogi, M. Lee, S. Yazaki, M. Mikami, Y. Nakamura, and W. Kim,
  “Aluminum dust explosion experiment in quiescent flow using a microgravity environment ,”
  JSME Thermal Engineering Conference 2022, Tokyo, Japan, Oct. 8-9, (2022), G114.

• Y. Ueno, R. Saeki, T, Johzaki, T, Endo, W. Kim, and M. Lee,
  “Effect of oxygen concentration on explosion of aluminum powder clouds,”
  JAFSE Annual Symposium 2022, On-line, May 28-29, (2022), B-03.

• D. Wang, M. Lee, and Y. Suzuki,
  “Study on Nitriding of Metal Walls by Ammonia Flames,”
  The 59th National Heat Transfer Symposium of Japan, Gifu, Japan, May 18-20, (2022), A313.

• G. Li, M. Lee, and Y. Suzuki,
  “Simultaneous measurements of HCHO concentration and gas temperature for elucidating characteristics of the premixed cool flame ignition,”
  The 59th National Heat Transfer Symposium of Japan, Gifu, Japan, May 18-20, (2022), A313.

• G. Yoo, M. Lee, and Y. Suzuki,
  “Development of the metal-based micro-thermoelectric generation module directly heated by catalytic combustion,”
  The 59th National Heat Transfer Symposium of Japan, Gifu, Japan, May 18-20, (2022), A343.

< 2021 >

• S. Chikushi, S. Hamasaki, K. Nagatani, H. Asama, M. Lee, and Y. Suzuki,
  “Power Consumption Estimation of Mobile Robot Drive System by Neural Network,”
  SICE SI2021 Annual Conference, Online, Dec. 15-17, (2021), 1H5-06.

• T. Mizuno, M. Lee, and Y. Suzuki,
  “Wall Chemical Effects on the Ignition and Extinction Characteristics of Premixed n-alkane Cool Flames,”
  The 59th Symposium (Japanese) on Combustion, Online, Nov. 22-24, (2021), E125.

• G. Li, M. Lee, and Y. Suzuki,
  “Measurement of Pressure Dependence on Ignition Characteristics of Premixed Cool Flame by Using TDLAS,”
  The 59th Symposium (Japanese) on Combustion, Online, Nov. 22-24, (2021), A224.

• D. Wang, M. Lee, and Y. Suzuki,
  “Effects of Ammonia Flames on Surface Hardness of Metal Walls,”
  The 59th Symposium (Japanese) on Combustion, Online, Nov. 22-24, (2021), B114.

• R. Saeki, R. Iihoshi, Y. Ueno, T. Endo, T. Mogi, M. Lee, R. Dobashi, K. Kuwana, S. Yazaki, M. Mikami, Y. Nakamura, T. Ishikawa, W. Kim,
  “Development of Apparatus for Short Duration Microgravity Experiments on Dust Explosions,”
  The 59th Symposium (Japanese) on Combustion, Online, Nov. 22-24, (2021), P118.

• R. Saeki, R. Iihoshi, Y. Ueno, T. Endo, T. Mogi, M. Lee, R. Dobashi, K. Kuwana, S. Yazaki, M. Mikami, Y. Nakamura, T. Ishikawa, W. Kim,
  “Flame Propagation in Aluminum Dust Explosions Using Short Duration Microgravity Environments,”
  Conference of the Japan Society of Microgravity Application (JASMAC-33), Online, Oct. 13-15, (2021), P28.

• W. Kim, R. Saeki, R. Iihoshi, Y. Ueno, T. Endo, T. Mogi, M. Lee, R. Dobashi, K. Kuwana, S. Yazaki, M. Mikami, Y. Nakamura, T. Ishikawa
  “Risk Assessment of Dust Explosions in a Microgravity Environment,”
  Conference of the Japan Society of Microgravity Application (JASMAC-33), Online, Oct. 13-15, (2021), OS1-11.

• P. Feng, M. Lee, Y. Suzuki,
  “Effect of Wall Surface Materials on Ammonia Pyrolysis,”
  JSME Thermal Engineering Conference 2021, Online, Japan, Oct. 9-10, (2021), A112.

• S. Uchida, M. Lee, H. Oshima, C. Lee, and Y. Suzuki,
  “Development of Thermoelectric Power Generation Module with Integrated Combustor Directly Heated by Catalytic Combustion,”
  JSME Thermal Engineering Conference 2021, Online, Oct. 9-10, (2021), A133.

• S. Sakamoto, M. Lee, and Y. Suzuki,
  “Effect of Pressure on Ignition Characteristics of Wall-stabilized Cool Flame,”
  The 58th National Heat Transfer Symposium of Japan, Online, May 25-27, (2021), C222.

• T. Mizuno, M. Lee, and Y. Suzuki,
  “Wall Chemical Effects on Ignition/Extinction Characteristics of n-alkane Wall-stabilized Cool Flames,”
  The 58th National Heat Transfer Symposium of Japan, Online, May 25-27, (2021), C134.

< 2020 >

• M. Lee, T. Mizuno, S. Sakamoto, and Y. Suzuki,
  “Wall Chemical Effect on the Ignition Process of Premixed Cool Flames,”
  The 58th Symposium (Japanese) on Combustion, Online, ec. 2-4, (2020), B112.

• T. Mizuno, M. Lee, and Y. Suzuki,
  “Study on Ignition and Extinction Characteristics of Wall-Stabilized n-alkane Cool Flames,”
  The 58th Symposium (Japanese) on Combustion, Online, Dec. 2-4, (2020), B111.

• Z. Wang, M. Lee, Y. Fan, and Y. Suzuki,
  “Investigation of Pyrolysis Effects on Ammonia Micro Flames,”
  The 58th Symposium (Japanese) on Combustion, Online, Dec. 2-4, (2020), C114.

• S. Uchida, M. Lee, and Y. Suzuki,
  “Temperature Distribution Measurement of Micro Thermoelectric Generation Module Directly Heated by Catalytic Combustion,”
  JSME Thermal Engineering Conference 2020, Online, Oct. 10-11, (2020), A123.

• Y. Suzuki, M. Lee, H. Asama, K. Nagatani, S. Hamasaki, S. Chikushi, C. H. Lee, Y. Fan, K. Nagase, H. Hachiuma, S. Fujimoto, T. Funabashi, N. Yokoo, H. Sato, K. Odagawa,
  “Development of the Innovative Thermoelectric Power Generation System for Autonomous Robots,”
  The 38th Annual Conference of the Robotics Society of Japan (RSJ), Online, Oct. 9-11, (2020), 2B3-05.

• M. Lee, T. Mizuno, Y. Ju, and Y. Suzuki,
  “Wall-Chemical Effects on the Ignition Temperature of Cool Flames,”
  The 57th National Heat Transfer Symposium of Japan, Jun. 3-5, (2020), D113.

• M. Lee, J. Peng, and Y. Suzuki,
  “High-temperature High-efficiency Micro-thermoelectric Generation Directly Heated by Catalytic Combustion,”
  The 57th National Heat Transfer Symposium of Japan, Jun. 3-5, (2020), D221.

• Z. Wang, Y. Fan, M. Lee, and Y. Suzuki,
  “LIF Measurements of Ammonia Micro Flame,”
  The 57th National Heat Transfer Symposium of Japan, Jun. 3-5, (2020), D134.

< 2019 >

• M. Lee, Y. Fan, Y. Ju, and Y. Suzuki,
  “Wall Chemical Effect on Ignition Characteristics of DME Cool Flames,”
  The 57th Symposium (Japanese) on Combustion, Sapporo, Japan, Nov. 20-22, (2019), A315.

• T. Mizuno, M. Lee, Y. Fan, Y. Ju, and Y. Suzuki,
  “Wall Chemical Effects on Wall-Stabilized n-Heptane Cool Flames,”
  The 57th Symposium (Japanese) on Combustion, Sapporo, Japan, Nov. 20-22, (2019), A331.

• J. Peng, M. Lee, Y. Fan, A. Yamamoto, and Y. Suzuki,
  “Development of a Metal Thermoelectric Generator Module Directly Heated by Catalytic Combustion,”
  The JSME Thermal Engineering Conference 2019, Nagoya, Japan, Oct. 12-13, (2019), D214.

• M. Lee, Y. Fan, and Y. Suzuki,
  “Evaluation of Cool Flame Ignition Temperature Using Wall-Stabilized Cool Flames,”
  The 56th National Heat Transfer Symposium of Japan, Tokushima, Japan, May 29-31, (2019), F132.

• M. Lee, S. Hara, K. Morimoto, and Y. Suzuki,
  “Wall Temperature Measurements of the Optical Engine Using Wireless Capacitive Sensor,”
  The 56th National Heat Transfer Symposium of Japan, Tokushima, Japan, May 29-31, (2019), G111.

< 2018 >

• M. Lee, Y. Fan, and Y. Suzuki,
  “Evaluation of Low-Temperature Chemistry Using Wall-Stabilized Steady Cool Flames,”
  The 56th Symposium (Japanese) on Combustion, Osaka, Japan, Nov. 14-16, (2018), D125.

• T. Kwan, M. Lee, K. Morimoto, and Y. Suzuki,
  “Development of Wireless Flexible Temperature Sensor Using the Temperature Dependence of Permittivity,”
  The 56th Symposium (Japanese) on Combustion, Osaka, Japan, Nov. 14-16, (2018), E341.

• M. Lee, Y. Fan, and Y. Suzuki,
  “Wall Chemical Effect of Metal Surfaces on Steady Cool Flames,”
  The JSME Thermal Engineering Conference 2018, Toyama, Japan, Oct. 20-21, (2018), C131.

• J. Peng, M. Lee, Y. Fan, A. Yamamoto, and Y. Suzuki,
  “Efficiency improvement of combustion based thermoelectric generator device using convection effect,”
  The JSME Thermal Engineering Conference 2018, Toyama, Japan, Oct. 20-21, (2018), D123.

• M. Lee, Y. Fan, and Y. Suzuki,
  “On the Wall-Chemical Effect of Wall-Stabilized Cool Flames,”
  The 55th National Heat Transfer Symposium of Japan, Sapporo, Japan, May 29-31, (2018). A123.

< 2017 >

• M. Lee, Y. Fan, C. B. Reuter, Y. Ju, and Y. Suzuki,
  “Numerical Study and HCHO-PLIF Measurement of Wall-Stabilized Cool Flames,”
  The 55th Symposium (Japanese) on Combustion, Toyama, Japan, Nov. 13-15, (2017). E131.

< 2016 >

• M. Lee, T. Kwan, K. Morimoto, and Y. Suzuki,
  “Ｗall Temperature Measurement in a Visualization Engine Using Wireless Sensor,”
  The 54th Symposium (Japanese) on Combustion, Sendai, Japan, Nov. 23-25, (2016). A332.

• M. Lee, K. Morimoto, and Y. Suzuki,
  “Wall Temperature Measurement of Combustion Field Using Highly Sensitive Wireless Temperature Sensor,”
  The 53rd National Heat Transfer Symposium of Japan, Osaka, Japan, May 24-26, (2016), I312.

< 2015 >

• M. Lee, K. Morimoto, and Y. Suzuki,
  “Wall temperature measurement of the unsteady field using a wireless temperature sensor,”
  The 53rd Symposium (Japanese) on Combustion, Tsukuba, Japan, Nov. 16-18, (2015), pp. A333.

• M. Lee, K. Morimoto, and Y. Suzuki,
  “Development of Polyimide-based Flexible Wireless Temperature Sensor,”
  The 52nd National Heat Transfer Symposium of Japan, Fukuoka, Japan, Jun. 3-5, (2015), B211.

< 2014 >

• M. Lee and Y. Suzuki,
  “Development of MEMS Wireless Temperature Sensor,”
  The 52nd Symposium (Japanese) on Combustion, Okayama, Japan, Dec. 3-5, (2014), pp. 240-241.

Last update: Mar. 17th, 2025