Biography
2015 | Postdoctoral Fellow, Dept. of Mechanical Engineering, The University of Tokyo |
2015 | PhD, Dept. of Mechanical Engineering, The University of Tokyo |
2011 | Master, Dept. of Mechanical Engineering, Northwestern Polytechnical University |
2008 | Bachelor, Dept. of Mechanical Engineering, Northwestern Polytechnical University |
Research Interests
- Development of MEMS-based Vibration Energy Harvester with Vertical Electret
- Development of MEMS-based Gyroscope and Integrated Micromachined Inertial Measurement Unit for Vehicle Navigation
Publication
- Q. Fu, and Y. Suzuki. “In-plane Gap-closing MEMS Vibration Electret Energy Harvester on Thick BOX Layer,” 18th Int. Conf. Solid-state Sensors, Actuators, and Microsystems (Transducers ’15), Anchorage, (2015), pp. 1925-1928.
- Q. Fu, and Y. Suzuki. “MEMS Vibration Electret Energy Harvester with Combined Electrodes,” 27th IEEE Int. Conf. Micro Electro Mechanical Systems (MEMS’14), San Francisco, (2014), pp. 409-412.
- Q. Fu, and Y. Suzuki. “A Design Method of In-plane MEMS Electret Energy Harvester with Comb Drives,” 14th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2014), Awaji, (2014). Also, J. Phys.: Conf. Ser., Vol. 557, No. 012011 (2014).
- Q. Fu, and Y. Suzuki. “Development of Micron-gap Electret Charged with Soft X-ray and Its Application to Vibration Energy Harvesting,” IEEE 15th Int. Symp. Electrets (ISE15), Baltimore, (2014).
- Q. Fu, and Y. Suzuki. “Large-Dynamic-Range MEMS Electret Energy Harvester with Gap-closing/Overlapping-area-change Electrodes,” 13th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2013), London, (2013), pp. 542-546.
- S. Kim, Q. Fu, K. Hagiwara, and Y. Suzuki. “Development of A Pre-packaged MEMS Electret Energy Harvester Before Charging,” 14th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2014), Awaji, (2014). Also, J. Phys.: Conf. Ser., Vol. 557, No. 012063 (2014).
- H. Chang, Q. Fu, J. Xie, et al. “An Integrated Reduced Micromachined Inertial Measurement Unit for Land Vehicle Navigation,” 6th IEEE Int. Conf. on Nano/Micro Engineered and Molecular Systems (NEMS'11), Taiwan, (2011), pp. 201-204.
- 金 善右, 付 乾炎, 萩原 啓, 鈴木 雄二 「Development of a Pre-packaged MEMS Electret Energy Harvester before Charging」, 第6回マイクロ・ナノ工学シンポジウム, 松江, 2014年10月20日-10月22日.
- 付 乾炎, 鈴木 雄二 「Development of MEMS Vibration Energy Harvester with Soft-X-ray- charged Vertical Electrets」, 第5回マイクロ・ナノ工学シンポジウム, 仙台, 5AM2-C-3, 2013年11月4日-11月6日.
- H. Chang, Q. Fu, J. Xie, et al. “Micromachined inertial measurement unit fabricated by a SOI process with selective roughening under structures,” Micro & Nano Letters, Vol. 6, Issue 7, pp: 486-489, 2011.
- H. Chang, W. Jiao, Q. Fu, W. Yuan, et al. “Design and Simulation of a MEMS Control Moment Gyroscope for the Sub-kilogram Spacecraft,” Sensors, Vol. 10, Issue 4, pp: 4130-4144, 2010.
International Conference
Domestic Conference
Journal Papers
Hobbies
- Basketball
- Table Tennis